|
| MOQ: | 2톤 |
| 가격: | USD 4,800-5,800 / Ton |
| 표준 포장: | 녹 방지 오일 코팅, VCI 종이 랩, 강철 스트립 고정, 훈증 목재 팔레트 |
| 배달 기간: | 주문 확인 후 영업일 기준 20~30일 |
| 지불 방법: | 보자마자 T/T, L/C |
| 공급 능력: | 한 달에 1500 톤 |
Our 2205 duplex stainless steel coil combines the best properties of austenitic and ferritic stainless steels, offering twice the yield strength of conventional 304/316 grades (≥450 MPa vs ≥205 MPa). With approximately 50% austenite and 50% ferrite microstructure, this material delivers an unmatched combination of strength and corrosion resistance. The hot rolled No.1 finish is ideal for heavy industrial applications including pressure vessels, chemical storage tanks, and offshore structural components. This product is in strong demand from Middle Eastern oil & gas, European chemical, and Southeast Asian marine engineering sectors.
| Grade | 2205 (UNS S32205/S31803 / EN 1.4462) |
| Standard | ASTM A240/A240M, NORSOK M-650 |
| Thickness Range | 4.0mm - 8.0mm |
| Width Range | 1500mm, 2000mm |
| Surface Finish | No.1 (Hot Rolled, Annealed & Pickled) |
| Coil ID | 610mm |
| Yield Strength | ≥450 MPa |
| Tensile Strength | ≥620 MPa |
| PREN | ≥34 |
| Chemical Composition | C≤0.03%, Cr 22-23%, Ni 4.5-6.5%, Mo 3-3.5%, N 0.14-0.20%, Mn≤2.0% |
Heavy-gauge coils coated with anti-rust oil, wrapped in VCI paper, secured with multiple steel strips, and placed on reinforced fumigated wooden pallets. NORSOK M-650 qualification certificates and MTC EN 10204 3.1 provided. Custom slitting to width available.
비디오
비디오
비디오
비디오
비디오
비디오
|
|
| MOQ: | 2톤 |
| 가격: | USD 4,800-5,800 / Ton |
| 표준 포장: | 녹 방지 오일 코팅, VCI 종이 랩, 강철 스트립 고정, 훈증 목재 팔레트 |
| 배달 기간: | 주문 확인 후 영업일 기준 20~30일 |
| 지불 방법: | 보자마자 T/T, L/C |
| 공급 능력: | 한 달에 1500 톤 |
Our 2205 duplex stainless steel coil combines the best properties of austenitic and ferritic stainless steels, offering twice the yield strength of conventional 304/316 grades (≥450 MPa vs ≥205 MPa). With approximately 50% austenite and 50% ferrite microstructure, this material delivers an unmatched combination of strength and corrosion resistance. The hot rolled No.1 finish is ideal for heavy industrial applications including pressure vessels, chemical storage tanks, and offshore structural components. This product is in strong demand from Middle Eastern oil & gas, European chemical, and Southeast Asian marine engineering sectors.
| Grade | 2205 (UNS S32205/S31803 / EN 1.4462) |
| Standard | ASTM A240/A240M, NORSOK M-650 |
| Thickness Range | 4.0mm - 8.0mm |
| Width Range | 1500mm, 2000mm |
| Surface Finish | No.1 (Hot Rolled, Annealed & Pickled) |
| Coil ID | 610mm |
| Yield Strength | ≥450 MPa |
| Tensile Strength | ≥620 MPa |
| PREN | ≥34 |
| Chemical Composition | C≤0.03%, Cr 22-23%, Ni 4.5-6.5%, Mo 3-3.5%, N 0.14-0.20%, Mn≤2.0% |
Heavy-gauge coils coated with anti-rust oil, wrapped in VCI paper, secured with multiple steel strips, and placed on reinforced fumigated wooden pallets. NORSOK M-650 qualification certificates and MTC EN 10204 3.1 provided. Custom slitting to width available.
