DETAILS VAN DE PRODUCTEN

Huis > Producten >

S10C C10 1010 Low Carbon Steel Plate Cold Rolled 0.5mm-5.0mm 1500mm Width for Metal Forming and General Engineering

Producten

De gegalvaniseerde Buis van de Staalpijp

Het Spoor van de staalspoorweg

S10C C10 1010 Low Carbon Steel Plate Cold Rolled 0.5mm-5.0mm 1500mm Width for Metal Forming and General Engineering

MOQ:	3 ton
Prijs:	USD 570-710 / Ton
Standaardverpakking:	Roestwerende oliecoating, VCI-papier, PE-folieverpakking, stalen stripbundel, export houten pallet
Leveringstermijn:	10-18 werkdagen na orderbevestiging
Betaalmethode:	T/T, L/C op zicht
Toeleveringskapaciteit:	12000 ton per maand

Detailinformatie

Productbeschrijving

Detailinformatie

Plaats van herkomst

Sjanghai, China

Merknaam

Baosteel

Certificering

ISO 9001:2015, JIS G4051, ASTM A510M, EN 10084

Modelnummer

S10C-CR-FORM

Cijfer:

S10C / C10 / 1010 / 10 # (UNS G10100, 1.0301)

Standaard:

JIS G4051, ASTM A510M, GB/T 699, EN 10084

Dikte:

0,5 mm - 5,0 mm

Breedte:

1000 mm, 1219 mm, 1250 mm, 1500 mm

Lengte:

2000 mm, 2438 mm, 2500 mm, 3000 mm

Koolstofgehalte:

0,08% - 0,13%

Hardheid:

HRB 40-60 (gegloeid)

Verlenging:

Sollicitatie:

Metaalvormen, buigen, spinnen, algemene techniek, beugels, behuizingen, ringen

Min. bestelaantal:

3 ton

Prijs:

USD 570-710 / Ton

Verpakking Details:

Roestwerende oliecoating, VCI-papier, PE-folieverpakking, stalen stripbundel, export houten pallet

Levertijd:

10-18 werkdagen na orderbevestiging

Betalingscondities:

T/T, L/C op zicht

Levering vermogen:

12000 ton per maand

Markeren:

low carbon steel plate 1500mm width

cold rolled steel plate for metal forming

C10 1010 steel plate general engineering

Productbeschrijving

S10C / C10 / 1010 Low Carbon Steel Plate — Maximum Formability Grade

Our S10C (JIS) / C10 (EN) / 1010 (AISI) low carbon steel plate with just 0.08-0.13% carbon offers the ultimate in cold formability and ductility for the most demanding bending, spinning, roll forming, and stamping applications. In the fully annealed condition (HRB 40-60, elongation ≥30%), this grade can tolerate tight-radius bends and complex cold forming that would crack higher-carbon grades. Its low carbon content also ensures excellent spot and projection welding. Available from thin 0.5mm sheets to 5.0mm plates, this is the go-to general engineering material for Middle Eastern light fabrication workshops, Southeast Asian general engineering job shops, and African manufacturing facilities.

Key Features

Maximum Ductility: Extremely low carbon (0.08-0.13%) combined with full annealing delivers ≥30% elongation, enabling tight-radius bending (<1T) and aggressive cold forming without cracking
Excellent Case Hardening Response: After forming, parts can be carburized to produce a hard wear-resistant surface (HRC 58-62) with a tough ductile core — ideal for cams, pins, bushings, and wear plates
Superior Weldability: Very low carbon equivalent allows all welding methods (spot, MIG, TIG, projection) with zero preheat requirements — no hardening in the HAZ
Smooth Cold Rolled Surface: Ready for direct painting, powder coating, zinc plating, or chrome plating without additional surface preparation
Cost-Effective: Lowest alloy cost among engineering steels while providing sufficient strength (≥335 MPa tensile) for a wide range of non-structural applications

Technical Specifications

Grade	S10C / C10 / 1010 / 10# (UNS G10100 / EN 1.0301)
Standard	JIS G4051, ASTM A510M, GB/T 699, EN 10084
Thickness	0.5mm - 5.0mm
Width	1000mm - 1500mm
Hardness	HRB 40-60 (annealed, as-supplied)
Tensile Strength	≥335 MPa
Elongation	≥30%

Target Markets & Applications

Middle East: Metal furniture frames (bent tube replacement), electrical panel enclosures, HVAC duct flanges, decorative metalwork
Southeast Asia: Motorcycle sprocket blanks (case hardened), gas cylinder neck rings, pipe flange gaskets, machinery spacers and shims
Africa: General fabrication workshop stock, agricultural implement brackets, hand tool blanks, water tank fittings
Case hardened parts: cam followers, thrust washers, wear strips, latch components, light-duty gears

Packaging & Delivery

Sheets interleaved with VCI paper, protected with anti-rust oil, wrapped in PE film cover. Steel strip bundled on fumigated export wooden pallets. Custom cut-to-size service available. Standard delivery FOB Shanghai/Ningbo/Tianjin, CIF to Middle East, Southeast Asia, and African ports.

Taggen:

Producten

MOQ:	3 ton
Prijs:	USD 570-710 / Ton
Standaardverpakking:	Roestwerende oliecoating, VCI-papier, PE-folieverpakking, stalen stripbundel, export houten pallet
Leveringstermijn:	10-18 werkdagen na orderbevestiging
Betaalmethode:	T/T, L/C op zicht
Toeleveringskapaciteit:	12000 ton per maand

Detailinformatie

Productbeschrijving

Detailinformatie

Plaats van herkomst

Sjanghai, China

Merknaam

Baosteel

Certificering

ISO 9001:2015, JIS G4051, ASTM A510M, EN 10084

Modelnummer

S10C-CR-FORM

Cijfer:

S10C / C10 / 1010 / 10 # (UNS G10100, 1.0301)

Standaard:

JIS G4051, ASTM A510M, GB/T 699, EN 10084

Dikte:

0,5 mm - 5,0 mm

Breedte:

1000 mm, 1219 mm, 1250 mm, 1500 mm

Lengte:

2000 mm, 2438 mm, 2500 mm, 3000 mm

Koolstofgehalte:

0,08% - 0,13%

Hardheid:

HRB 40-60 (gegloeid)

Verlenging:

≥30%

Sollicitatie:

Metaalvormen, buigen, spinnen, algemene techniek, beugels, behuizingen, ringen

Min. bestelaantal:

3 ton

Prijs:

USD 570-710 / Ton

Verpakking Details:

Roestwerende oliecoating, VCI-papier, PE-folieverpakking, stalen stripbundel, export houten pallet

Levertijd:

10-18 werkdagen na orderbevestiging

Betalingscondities:

T/T, L/C op zicht

Levering vermogen:

12000 ton per maand

Markeren

low carbon steel plate 1500mm width

cold rolled steel plate for metal forming

C10 1010 steel plate general engineering

Productbeschrijving

S10C / C10 / 1010 Low Carbon Steel Plate — Maximum Formability Grade

Key Features

Maximum Ductility: Extremely low carbon (0.08-0.13%) combined with full annealing delivers ≥30% elongation, enabling tight-radius bending (<1T) and aggressive cold forming without cracking
Excellent Case Hardening Response: After forming, parts can be carburized to produce a hard wear-resistant surface (HRC 58-62) with a tough ductile core — ideal for cams, pins, bushings, and wear plates
Superior Weldability: Very low carbon equivalent allows all welding methods (spot, MIG, TIG, projection) with zero preheat requirements — no hardening in the HAZ
Smooth Cold Rolled Surface: Ready for direct painting, powder coating, zinc plating, or chrome plating without additional surface preparation
Cost-Effective: Lowest alloy cost among engineering steels while providing sufficient strength (≥335 MPa tensile) for a wide range of non-structural applications

Technical Specifications

Grade	S10C / C10 / 1010 / 10# (UNS G10100 / EN 1.0301)
Standard	JIS G4051, ASTM A510M, GB/T 699, EN 10084
Thickness	0.5mm - 5.0mm
Width	1000mm - 1500mm
Hardness	HRB 40-60 (annealed, as-supplied)
Tensile Strength	≥335 MPa
Elongation	≥30%

Target Markets & Applications

Middle East: Metal furniture frames (bent tube replacement), electrical panel enclosures, HVAC duct flanges, decorative metalwork
Southeast Asia: Motorcycle sprocket blanks (case hardened), gas cylinder neck rings, pipe flange gaskets, machinery spacers and shims
Africa: General fabrication workshop stock, agricultural implement brackets, hand tool blanks, water tank fittings
Case hardened parts: cam followers, thrust washers, wear strips, latch components, light-duty gears

Packaging & Delivery

Taggen:

Koolstofstaalspoel

Plaat van koolstofstaal

Kool van roestvrij staal

Plaat van roestvrij staal

Gegalvaniseerde Staalplaat

Titaniumbuis

PPGI-spoel

metaal golfdakwerkbladen

PIPE van koolstofstaal

Roestvrij stalen buis

De gegalvaniseerde Buis van de Staalpijp

Koolstofstalen staaf

Roestvrij staal Rod Bar

Gegalvaniseerde Draadrol

Het Spoor van de staalspoorweg

Stalen profielen

S10C C10 1010 Low Carbon Steel Plate Cold Rolled 0.5mm-5.0mm 1500mm Width for Metal Forming and General Engineering

low carbon steel plate 1500mm width

cold rolled steel plate for metal forming

C10 1010 steel plate general engineering

S10C / C10 / 1010 Low Carbon Steel Plate — Maximum Formability Grade

Key Features

Technical Specifications

Target Markets & Applications

Packaging & Delivery

A36 Warmgewalste Koolstofstaalplaat,

Warmgewalste Koolstofstaalplaat D32,

Koolstofstaalspoel

Plaat van koolstofstaal

Kool van roestvrij staal

Plaat van roestvrij staal

Gegalvaniseerde Staalplaat

Titaniumbuis

PPGI-spoel

metaal golfdakwerkbladen

PIPE van koolstofstaal

Roestvrij stalen buis

De gegalvaniseerde Buis van de Staalpijp

Koolstofstalen staaf

Roestvrij staal Rod Bar

Gegalvaniseerde Draadrol

Het Spoor van de staalspoorweg

Stalen profielen

low carbon steel plate 1500mm width

cold rolled steel plate for metal forming

C10 1010 steel plate general engineering

S10C / C10 / 1010 Low Carbon Steel Plate — Maximum Formability Grade

Key Features

Technical Specifications

Target Markets & Applications

Packaging & Delivery

A36 Warmgewalste Koolstofstaalplaat,

Warmgewalste Koolstofstaalplaat D32,