EINZELHEITEN ZU DEN PRODUKTEN

Haus > Produits >

S10C C10 1010 Low Carbon Steel Plate Cold Rolled 0.5mm-5.0mm 1500mm Width for Metal Forming and General Engineering

Produits

Metallgewölbte Überdachungsblätter

Stahlprofile

Kontakt mit uns

Kontaktieren Sie uns jetzt

S10C C10 1010 Low Carbon Steel Plate Cold Rolled 0.5mm-5.0mm 1500mm Width for Metal Forming and General Engineering

MOQ:	3 Tonnen
Preis:	USD 570-710 / Ton
Standardverpackung:	Rostschutzölbeschichtung, VCI-Papier, PE-Folienverpackung, Stahlbandbündel, Exportholzpalette
Lieferfrist:	10-18 Werktage nach Auftragsbestätigung
Zahlungsmethode:	T/T, L/C auf Sicht
Lieferkapazität:	12000 Tonnen pro Monat

Ausführliche Information

Beschreibung des Produkts

Ausführliche Information

Herkunftsort

Shanghai, China

Markenname

Baosteel

Zertifizierung

ISO 9001:2015, JIS G4051, ASTM A510M, EN 10084

Modellnummer

S10C-CR-FORM

Grad:

S10C / C10 / 1010 / 10# (UNS G10100, 1.0301)

Standard:

JIS G4051, ASTM A510M, GB/T 699, EN 10084

Dicke:

0,5 mm - 5,0 mm

Breite:

1000 mm, 1219 mm, 1250 mm, 1500 mm

Länge:

2000mm, 2438mm, 2500mm, 3000mm

Kohlenstoffgehalt:

0,08 % – 0,13 %

Härte:

HRB 40-60 (geglüht)

Verlängerung:

≥30 %

Anwendung:

Metallumformung, Biegen, Drehen, allgemeiner Maschinenbau, Halterungen, Gehäuse, Unterlegscheiben

Min Bestellmenge:

3 Tonnen

Preis:

USD 570-710 / Ton

Verpackung Informationen:

Rostschutzölbeschichtung, VCI-Papier, PE-Folienverpackung, Stahlbandbündel, Exportholzpalette

Lieferzeit:

10-18 Werktage nach Auftragsbestätigung

Zahlungsbedingungen:

T/T, L/C auf Sicht

Versorgungsmaterial-Fähigkeit:

12000 Tonnen pro Monat

Hervorheben:

low carbon steel plate 1500mm width

cold rolled steel plate for metal forming

C10 1010 steel plate general engineering

Beschreibung des Produkts

S10C / C10 / 1010 Low Carbon Steel Plate — Maximum Formability Grade

Our S10C (JIS) / C10 (EN) / 1010 (AISI) low carbon steel plate with just 0.08-0.13% carbon offers the ultimate in cold formability and ductility for the most demanding bending, spinning, roll forming, and stamping applications. In the fully annealed condition (HRB 40-60, elongation ≥30%), this grade can tolerate tight-radius bends and complex cold forming that would crack higher-carbon grades. Its low carbon content also ensures excellent spot and projection welding. Available from thin 0.5mm sheets to 5.0mm plates, this is the go-to general engineering material for Middle Eastern light fabrication workshops, Southeast Asian general engineering job shops, and African manufacturing facilities.

Key Features

Maximum Ductility: Extremely low carbon (0.08-0.13%) combined with full annealing delivers ≥30% elongation, enabling tight-radius bending (<1T) and aggressive cold forming without cracking
Excellent Case Hardening Response: After forming, parts can be carburized to produce a hard wear-resistant surface (HRC 58-62) with a tough ductile core — ideal for cams, pins, bushings, and wear plates
Superior Weldability: Very low carbon equivalent allows all welding methods (spot, MIG, TIG, projection) with zero preheat requirements — no hardening in the HAZ
Smooth Cold Rolled Surface: Ready for direct painting, powder coating, zinc plating, or chrome plating without additional surface preparation
Cost-Effective: Lowest alloy cost among engineering steels while providing sufficient strength (≥335 MPa tensile) for a wide range of non-structural applications

Technical Specifications

Grade	S10C / C10 / 1010 / 10# (UNS G10100 / EN 1.0301)
Standard	JIS G4051, ASTM A510M, GB/T 699, EN 10084
Thickness	0.5mm - 5.0mm
Width	1000mm - 1500mm
Hardness	HRB 40-60 (annealed, as-supplied)
Tensile Strength	≥335 MPa
Elongation	≥30%

Target Markets & Applications

Middle East: Metal furniture frames (bent tube replacement), electrical panel enclosures, HVAC duct flanges, decorative metalwork
Southeast Asia: Motorcycle sprocket blanks (case hardened), gas cylinder neck rings, pipe flange gaskets, machinery spacers and shims
Africa: General fabrication workshop stock, agricultural implement brackets, hand tool blanks, water tank fittings
Case hardened parts: cam followers, thrust washers, wear strips, latch components, light-duty gears

Packaging & Delivery

Sheets interleaved with VCI paper, protected with anti-rust oil, wrapped in PE film cover. Steel strip bundled on fumigated export wooden pallets. Custom cut-to-size service available. Standard delivery FOB Shanghai/Ningbo/Tianjin, CIF to Middle East, Southeast Asia, and African ports.

Stichworte:

Produits

MOQ:	3 Tonnen
Preis:	USD 570-710 / Ton
Standardverpackung:	Rostschutzölbeschichtung, VCI-Papier, PE-Folienverpackung, Stahlbandbündel, Exportholzpalette
Lieferfrist:	10-18 Werktage nach Auftragsbestätigung
Zahlungsmethode:	T/T, L/C auf Sicht
Lieferkapazität:	12000 Tonnen pro Monat

Ausführliche Information

Beschreibung des Produkts

Ausführliche Information

Herkunftsort

Shanghai, China

Markenname

Baosteel

Zertifizierung

ISO 9001:2015, JIS G4051, ASTM A510M, EN 10084

Modellnummer

S10C-CR-FORM

Grad:

S10C / C10 / 1010 / 10# (UNS G10100, 1.0301)

Standard:

JIS G4051, ASTM A510M, GB/T 699, EN 10084

Dicke:

0,5 mm - 5,0 mm

Breite:

1000 mm, 1219 mm, 1250 mm, 1500 mm

Länge:

2000mm, 2438mm, 2500mm, 3000mm

Kohlenstoffgehalt:

0,08 % – 0,13 %

Härte:

HRB 40-60 (geglüht)

Verlängerung:

≥30 %

Anwendung:

Metallumformung, Biegen, Drehen, allgemeiner Maschinenbau, Halterungen, Gehäuse, Unterlegscheiben

Min Bestellmenge:

3 Tonnen

Preis:

USD 570-710 / Ton

Verpackung Informationen:

Rostschutzölbeschichtung, VCI-Papier, PE-Folienverpackung, Stahlbandbündel, Exportholzpalette

Lieferzeit:

10-18 Werktage nach Auftragsbestätigung

Zahlungsbedingungen:

T/T, L/C auf Sicht

Versorgungsmaterial-Fähigkeit:

12000 Tonnen pro Monat

Hervorheben

low carbon steel plate 1500mm width

cold rolled steel plate for metal forming

C10 1010 steel plate general engineering

Beschreibung des Produkts

S10C / C10 / 1010 Low Carbon Steel Plate — Maximum Formability Grade

Key Features

Maximum Ductility: Extremely low carbon (0.08-0.13%) combined with full annealing delivers ≥30% elongation, enabling tight-radius bending (<1T) and aggressive cold forming without cracking
Excellent Case Hardening Response: After forming, parts can be carburized to produce a hard wear-resistant surface (HRC 58-62) with a tough ductile core — ideal for cams, pins, bushings, and wear plates
Superior Weldability: Very low carbon equivalent allows all welding methods (spot, MIG, TIG, projection) with zero preheat requirements — no hardening in the HAZ
Smooth Cold Rolled Surface: Ready for direct painting, powder coating, zinc plating, or chrome plating without additional surface preparation
Cost-Effective: Lowest alloy cost among engineering steels while providing sufficient strength (≥335 MPa tensile) for a wide range of non-structural applications

Technical Specifications

Grade	S10C / C10 / 1010 / 10# (UNS G10100 / EN 1.0301)
Standard	JIS G4051, ASTM A510M, GB/T 699, EN 10084
Thickness	0.5mm - 5.0mm
Width	1000mm - 1500mm
Hardness	HRB 40-60 (annealed, as-supplied)
Tensile Strength	≥335 MPa
Elongation	≥30%

Target Markets & Applications

Middle East: Metal furniture frames (bent tube replacement), electrical panel enclosures, HVAC duct flanges, decorative metalwork
Southeast Asia: Motorcycle sprocket blanks (case hardened), gas cylinder neck rings, pipe flange gaskets, machinery spacers and shims
Africa: General fabrication workshop stock, agricultural implement brackets, hand tool blanks, water tank fittings
Case hardened parts: cam followers, thrust washers, wear strips, latch components, light-duty gears

Packaging & Delivery

Stichworte:

Kohlenstoffstahlspule

Stahlplatten aus Kohlenstoff

Spirale aus Edelstahl

Bleche aus Edelstahl

Galvanisierte Stahlplatte

Titanrohr

PPGI-Spule

Metallgewölbte Überdachungsblätter

Rohr aus Kohlenstoffstahl

Edelstahlrohr

Galvanisiertes Stahlrohr-Rohr

Stange aus Kohlenstoffstahl

Edelstahl Rod Bar

Galvanisierter Drahtring

Stahleisenbahnlinie

Stahlprofile

S10C C10 1010 Low Carbon Steel Plate Cold Rolled 0.5mm-5.0mm 1500mm Width for Metal Forming and General Engineering

low carbon steel plate 1500mm width

cold rolled steel plate for metal forming

C10 1010 steel plate general engineering

S10C / C10 / 1010 Low Carbon Steel Plate — Maximum Formability Grade

Key Features

Technical Specifications

Target Markets & Applications

Packaging & Delivery

Warm gewalzte A36 Kohlenstoffstahl-Platte,

Warm gewalzte Kohlenstoffstahl-Platte D32,

Kohlenstoffstahlspule

Stahlplatten aus Kohlenstoff

Spirale aus Edelstahl

Bleche aus Edelstahl

Galvanisierte Stahlplatte

Titanrohr

PPGI-Spule

Metallgewölbte Überdachungsblätter

Rohr aus Kohlenstoffstahl

Edelstahlrohr

Galvanisiertes Stahlrohr-Rohr

Stange aus Kohlenstoffstahl

Edelstahl Rod Bar

Galvanisierter Drahtring

Stahleisenbahnlinie

Stahlprofile

low carbon steel plate 1500mm width

cold rolled steel plate for metal forming

C10 1010 steel plate general engineering

S10C / C10 / 1010 Low Carbon Steel Plate — Maximum Formability Grade

Key Features

Technical Specifications

Target Markets & Applications

Packaging & Delivery

Warm gewalzte A36 Kohlenstoffstahl-Platte,

Warm gewalzte Kohlenstoffstahl-Platte D32,