|
| MOQ: | 2トン |
| 価格: | USD 3,800-4,500 / Ton |
| 標準パッケージ: | VCI防錆紙付きPEフィルム、スチールストリップバンド、輸出用木製パレット |
| 配達期間: | 注文確認後15〜20営業日 |
| 決済方法: | T/T、L/C を確認できます |
| 供給能力: | 月額2500トン |
Our 321 stainless steel coil is stabilized with titanium (5xC minimum) to prevent intergranular corrosion during welding and elevated temperature service. Unlike 304/304L, the titanium addition ties up carbon to prevent chromium carbide precipitation at grain boundaries, eliminating the need for post-weld heat treatment. With a cold rolled 2B finish, this product is the preferred choice for European and Middle Eastern manufacturers of heat exchangers, pressure vessels, boiler components, and high-temperature welded assemblies.
| Grade | 321 (UNS S32100 / EN 1.4541) |
| Standard | ASTM A240/A240M |
| Thickness Range | 0.5mm - 3.0mm |
| Width Range | 1219mm, 1500mm |
| Surface Finish | 2B (Cold Rolled, Annealed & Pickled) |
| Coil ID | 508mm / 610mm |
| Ti Content | 5 x C% min (typically 0.3-0.7%) |
| Chemical Composition | C≤0.08%, Cr 17-19%, Ni 9-12%, Ti 5xC min, Mn≤2.0%, Si≤1.0% |
Coils are protected with PE film and VCI (Volatile Corrosion Inhibitor) anti-rust paper, banded with steel strips, and packed on fumigated export wooden pallets. MTC (Mill Test Certificate) EN 10204 3.1 provided with each shipment.
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
|
|
| MOQ: | 2トン |
| 価格: | USD 3,800-4,500 / Ton |
| 標準パッケージ: | VCI防錆紙付きPEフィルム、スチールストリップバンド、輸出用木製パレット |
| 配達期間: | 注文確認後15〜20営業日 |
| 決済方法: | T/T、L/C を確認できます |
| 供給能力: | 月額2500トン |
Our 321 stainless steel coil is stabilized with titanium (5xC minimum) to prevent intergranular corrosion during welding and elevated temperature service. Unlike 304/304L, the titanium addition ties up carbon to prevent chromium carbide precipitation at grain boundaries, eliminating the need for post-weld heat treatment. With a cold rolled 2B finish, this product is the preferred choice for European and Middle Eastern manufacturers of heat exchangers, pressure vessels, boiler components, and high-temperature welded assemblies.
| Grade | 321 (UNS S32100 / EN 1.4541) |
| Standard | ASTM A240/A240M |
| Thickness Range | 0.5mm - 3.0mm |
| Width Range | 1219mm, 1500mm |
| Surface Finish | 2B (Cold Rolled, Annealed & Pickled) |
| Coil ID | 508mm / 610mm |
| Ti Content | 5 x C% min (typically 0.3-0.7%) |
| Chemical Composition | C≤0.08%, Cr 17-19%, Ni 9-12%, Ti 5xC min, Mn≤2.0%, Si≤1.0% |
Coils are protected with PE film and VCI (Volatile Corrosion Inhibitor) anti-rust paper, banded with steel strips, and packed on fumigated export wooden pallets. MTC (Mill Test Certificate) EN 10204 3.1 provided with each shipment.
