|
| MOQ: | 2톤 |
| 가격: | USD 3,800-4,500 / Ton |
| 표준 포장: | VCI 녹슬지 않는 종이, 강철 스트립 밴딩, 수출용 목재 팔레트가 포함된 PE 필름 |
| 배달 기간: | 주문 확인 후 영업일 기준 15~20일 |
| 지불 방법: | 보자마자 T/T, L/C |
| 공급 능력: | 한 달에 2500 톤 |
Our 321 stainless steel coil is stabilized with titanium (5xC minimum) to prevent intergranular corrosion during welding and elevated temperature service. Unlike 304/304L, the titanium addition ties up carbon to prevent chromium carbide precipitation at grain boundaries, eliminating the need for post-weld heat treatment. With a cold rolled 2B finish, this product is the preferred choice for European and Middle Eastern manufacturers of heat exchangers, pressure vessels, boiler components, and high-temperature welded assemblies.
| Grade | 321 (UNS S32100 / EN 1.4541) |
| Standard | ASTM A240/A240M |
| Thickness Range | 0.5mm - 3.0mm |
| Width Range | 1219mm, 1500mm |
| Surface Finish | 2B (Cold Rolled, Annealed & Pickled) |
| Coil ID | 508mm / 610mm |
| Ti Content | 5 x C% min (typically 0.3-0.7%) |
| Chemical Composition | C≤0.08%, Cr 17-19%, Ni 9-12%, Ti 5xC min, Mn≤2.0%, Si≤1.0% |
Coils are protected with PE film and VCI (Volatile Corrosion Inhibitor) anti-rust paper, banded with steel strips, and packed on fumigated export wooden pallets. MTC (Mill Test Certificate) EN 10204 3.1 provided with each shipment.
비디오
비디오
비디오
비디오
비디오
비디오
|
|
| MOQ: | 2톤 |
| 가격: | USD 3,800-4,500 / Ton |
| 표준 포장: | VCI 녹슬지 않는 종이, 강철 스트립 밴딩, 수출용 목재 팔레트가 포함된 PE 필름 |
| 배달 기간: | 주문 확인 후 영업일 기준 15~20일 |
| 지불 방법: | 보자마자 T/T, L/C |
| 공급 능력: | 한 달에 2500 톤 |
Our 321 stainless steel coil is stabilized with titanium (5xC minimum) to prevent intergranular corrosion during welding and elevated temperature service. Unlike 304/304L, the titanium addition ties up carbon to prevent chromium carbide precipitation at grain boundaries, eliminating the need for post-weld heat treatment. With a cold rolled 2B finish, this product is the preferred choice for European and Middle Eastern manufacturers of heat exchangers, pressure vessels, boiler components, and high-temperature welded assemblies.
| Grade | 321 (UNS S32100 / EN 1.4541) |
| Standard | ASTM A240/A240M |
| Thickness Range | 0.5mm - 3.0mm |
| Width Range | 1219mm, 1500mm |
| Surface Finish | 2B (Cold Rolled, Annealed & Pickled) |
| Coil ID | 508mm / 610mm |
| Ti Content | 5 x C% min (typically 0.3-0.7%) |
| Chemical Composition | C≤0.08%, Cr 17-19%, Ni 9-12%, Ti 5xC min, Mn≤2.0%, Si≤1.0% |
Coils are protected with PE film and VCI (Volatile Corrosion Inhibitor) anti-rust paper, banded with steel strips, and packed on fumigated export wooden pallets. MTC (Mill Test Certificate) EN 10204 3.1 provided with each shipment.
