|
| موك: | 2 طن |
| السعر: | USD 3,800-4,500 / Ton |
| العبوة القياسية: | فيلم PE مع ورق VCI المضاد للصدأ، ونطاقات الشريط الفولاذي، وتصدير لوح خشبي |
| فترة التسليم: | 15-20 يوم عمل بعد تأكيد الطلب |
| طريقة الدفع: | T / T، L / C في الافق |
| سعة التوريد: | 2500 طن شهريًا |
Our 321 stainless steel coil is stabilized with titanium (5xC minimum) to prevent intergranular corrosion during welding and elevated temperature service. Unlike 304/304L, the titanium addition ties up carbon to prevent chromium carbide precipitation at grain boundaries, eliminating the need for post-weld heat treatment. With a cold rolled 2B finish, this product is the preferred choice for European and Middle Eastern manufacturers of heat exchangers, pressure vessels, boiler components, and high-temperature welded assemblies.
| Grade | 321 (UNS S32100 / EN 1.4541) |
| Standard | ASTM A240/A240M |
| Thickness Range | 0.5mm - 3.0mm |
| Width Range | 1219mm, 1500mm |
| Surface Finish | 2B (Cold Rolled, Annealed & Pickled) |
| Coil ID | 508mm / 610mm |
| Ti Content | 5 x C% min (typically 0.3-0.7%) |
| Chemical Composition | C≤0.08%, Cr 17-19%, Ni 9-12%, Ti 5xC min, Mn≤2.0%, Si≤1.0% |
Coils are protected with PE film and VCI (Volatile Corrosion Inhibitor) anti-rust paper, banded with steel strips, and packed on fumigated export wooden pallets. MTC (Mill Test Certificate) EN 10204 3.1 provided with each shipment.
فيديو
|
|
| موك: | 2 طن |
| السعر: | USD 3,800-4,500 / Ton |
| العبوة القياسية: | فيلم PE مع ورق VCI المضاد للصدأ، ونطاقات الشريط الفولاذي، وتصدير لوح خشبي |
| فترة التسليم: | 15-20 يوم عمل بعد تأكيد الطلب |
| طريقة الدفع: | T / T، L / C في الافق |
| سعة التوريد: | 2500 طن شهريًا |
Our 321 stainless steel coil is stabilized with titanium (5xC minimum) to prevent intergranular corrosion during welding and elevated temperature service. Unlike 304/304L, the titanium addition ties up carbon to prevent chromium carbide precipitation at grain boundaries, eliminating the need for post-weld heat treatment. With a cold rolled 2B finish, this product is the preferred choice for European and Middle Eastern manufacturers of heat exchangers, pressure vessels, boiler components, and high-temperature welded assemblies.
| Grade | 321 (UNS S32100 / EN 1.4541) |
| Standard | ASTM A240/A240M |
| Thickness Range | 0.5mm - 3.0mm |
| Width Range | 1219mm, 1500mm |
| Surface Finish | 2B (Cold Rolled, Annealed & Pickled) |
| Coil ID | 508mm / 610mm |
| Ti Content | 5 x C% min (typically 0.3-0.7%) |
| Chemical Composition | C≤0.08%, Cr 17-19%, Ni 9-12%, Ti 5xC min, Mn≤2.0%, Si≤1.0% |
Coils are protected with PE film and VCI (Volatile Corrosion Inhibitor) anti-rust paper, banded with steel strips, and packed on fumigated export wooden pallets. MTC (Mill Test Certificate) EN 10204 3.1 provided with each shipment.
